Table of Contents
Advertisement
RX3041 V2 Router User's Manual
Chapter 2:
The router comes with a web-based configuration utility. Users can access this
configuration utility from any of client system within RX3041 V2 Router's LAN. For
best results, either use Microsoft Internet Explorer 6.0 or later, or Netscape Navigator
4.7 or later. Before you start configuring your router, you have to get the following
information from your ISP:
a) Has your ISP assigned you a static IP address, or they will assign one to you
dynamically? If you have received a static IP address, what is it?
b) Does your ISP use PPPoE? If so, what is your PPPoE username and password?
If you are not sure of above questions, please contact your ISP.
2.1 Start your Web Browser
To use the Web-Based Utility, you have to launch your Internet Browser (MS IE 6.0 or
later, Netscape Navigator 4.7 or later).
Step1: Enter the default IP address of RX3041 V2 Router http://192.168.1.1 in the
address field, and then, press Enter button:
Step2: After the login dialog box appears, enter "admin" as User Name and the
default password is also "admin", and then click "OK" to login web-based utility.
4
Setup Router Configurations via Web Browser
Advertisement
Table of Contents
