Download Print this page

Advertisement

Quick Links

1
Pick a Spot for Your Home Dock
Connect the Home Dock
When installing the Home Dock in your
1
Use the provided Stereo Audio Cable and connect the single 1/8" (3.5 mm) connector to the green
home, choose a location in close proximity
AUDIO connector at the rear of the Home Dock.
to your home audio or stereo system, and
2 Connect the white left and red right
also where the cable from the Indoor/
Stereo Audio Cable connectors to any
Outdoor Antenna can reach the Home
available input other than PHONO on your
Dock. The location should be easily
home stereo system. (If your stereo's
accessible and provide good visibility of
inputs are marked red and black, simply
the display, and should not be located
connect the white plug to the black input.)
where it will be in direct sunlight which will
affect the visibility of the display screen.
3 Turn the home stereo system On, and
make sure you select the correct input
You will also need to decide whether you
on your stereo system for the AUX In or
will be connecting your Home Dock to your
LINE In connection, or whichever input
home audio system using the provided
you have selected.
Audio Cable, or to powered speakers.
2B. To Connect the Home Dock to Your Powered Speakers
The Home Dock can be connected directly to a set of powered speakers.
1
Connect the 1/8" (3.5 mm) connector from the
powered speakers to the green AUDIO connector
2
Connect the Home Dock
at the rear of the Home Dock.
2 Plug the powered speakers into an AC outlet.
3 Turn On the powered speakers.
Connect the Indoor/Outdoor Antenna
Once you have selected a location, connect the Indoor/
Outdoor Antenna to the silver ANT connector at the right
side of the Home Dock. In step 4, we will work on the
location of the antenna.
3
Install the Battery
Connect the Home Power Adapter
Insert the battery into the XMp3i and then place it into the Home Dock as shown.
Connect the Home Power Adapter to the red POWER connector
at the left side of the Home Dock, and plug it into a wall outlet.
The battery is shipped partially charged. It is recommended that you allow the XMp3i to charge in the Home
Dock for at least 3 hours before removing it for portable use.
Connect the Home Dock to a Home Stereo System or
Powered Speakers
The Home Dock can be connected to your home stereo system,
or to a set of powered speakers. If you are connecting to a home
stereo system, see the following section, "2A. To Connect the
Home Dock to Your Home Stereo System". If you are connecting to a set of powered speakers, skip
ahead to "2B. To Connect the Home Dock to Your Powered Speakers".
2A. To Connect the Home Dock to Your Home Stereo System
The Home Dock can be connected to your home stereo system through the AUX In or LINE In connection
1. Open battery cover
of your home stereo system, using the provided Stereo Audio Cable.
4
Finding the XM Signal
(continued)
Indoor/Outdoor Antenna Installation
Begin by experimenting with the Indoor/Outdoor Antenna to get a feel for the reception
in your location. Move the antenna around the room or from room to room. Aim it from
different windows. In major metropolitan areas, you might find that you get great reception
in several locations without worrying too much about aim and placement.
Access the Antenna Aiming screen of your Radio to see a visual indication of signal strength:
1
Press menu.
2 Turn the Control Wheel to highlight Settings and press Select.
3 Turn the Control Wheel to highlight Antenna Aiming and press Select.
If you're receiving good Satellite and Terrestrial signal strength, you're done. If not,
try some of the suggestions which follow.
Other Indoor/Outdoor Antenna Installation Suggestions
Move the Antenna Closer to a Window
If you find you are getting a signal, but it's inconsistent, try moving the Indoor/Outdoor Antenna closer to a
window, ideally one that is facing due south.
Not sure which way is south? Think about where the
sun rises (in the east) and sets (in the west). Then stand
so that east is to your left and you'll be facing south. Is
there a window in the direction you're facing? Move the
antenna closer to the window.
TIP! Still not sure which way is south or where to
place your Indoor/Outdoor Antenna? Look up your
location on an online mapping website that offers
satellite views of street addresses where you can
easily see which way is south, and what window
may offer an unobstructed view of the sky.
Place the Antenna on a South Facing Window Sill
Another easy method is to start at any window, then
work from window to window in a simple pattern to
find the window gives the best signal strength. Aim the surface of the
antenna with the XM logo out the window. Note that the antenna must
also have an unobstructed view, with no trees or buildings blocking its
aim. If the antenna is aimed through a window, be aware that blinds,
screens, or any other non-glass elements such as thermal insulation
can sometimes cause reception issues. If this is the case, you may want
to use another window or place the antenna outside of the window.
If you find a window that gives you good signal strength, you can place
the antenna on the windowsill. The antenna may need to be placed on
something to raise it above the level of the window frame.
If you are still unable to obtain a good signal, refer to the User Guide which accompanied your XMp3i Radio,
2. Insert Battery
3. Replace battery cover
4. Dock Radio
or http://www.xmradio.com/help/index.xmc, for instructions on how to mount the Indoor/Outdoor Antenna
outside, on a windowsill, wall, or soffit.
5
Activation
Before you can enjoy Commercial-Free Music, plus Sports, News, Talk & Entertainment, you need to activate
your XMp3i.
1
Make sure your XMp3i is properly installed, turned on, and receiving the XM signal so that you
can hear the audio on channel 1.
2 Make a note of your XM Radio ID. You can find it on channel 0, on a label on the bottom of the gift
box, and on the label on the back of your XMp3i.
NOTE! The XM Radio ID does not use the letters I, O, S, or F.
3 Activate your service:
• Online: Go to www.xmradio.com and click on "ACTIVATE RADIO" in the top right corner
OR
• By phone: Call 1-800-XM-RADIO (1-800-967-2346)
4 When your service is activated, your XMp3i will receive all channels to which you have subscribed.
At this time, you use the Control Wheel or Remote Control to tune other channels. Activation
usually takes 10 to 15 minutes, but may take up to an hour. We recommend that your XMp3i
remain on until activated.
6
Using Your XMp3i
The Four Main Menu Options
The XMp3i has four main menu options which can be selected by pressing the menu button and turning the
Control Wheel to highlight and select one of the following four options:
Live XM: Listen to Live XM, browse channels or categories of channels such as Pop, Rock, Country, etc.
SOUTH
Check out the XM highlights, record songs, and set up scheduled
recordings.
My Music Library: Listen to, browse, and manage your XM recordings,
downloaded MP3 and WMA music files, and audio books.
SOUTH
Auto Recordings: Listen to content from your favorite XM channels that
your XMp3i can automatically save for you.
Settings: Make adjustments to the XMp3i's behavior, such as display brightness, audio equalizer
settings, and channel access. Select Info Extras to display scrolling stock ticker or sports scores.
Using Your XMp3i
7
Use Your XMp3i At Home or On-The-Go
(continued)
Listen to Live XM
At Home or Office
Indicates whether you
are listening to Live XM
Indicates that the
or Replay content
Browse the channels by
Power/Lock switch is
Place your XMp3i in the Home Dock to listen to live XM through your home stereo or powered speakers.
Battery Level
set in the lock position
turning the Control Wheel
Use the Remote Control to tune channels, play tracks from your music library, or record new content from
and pressing Select to
Satellite Signal Strength
Clock
across the room. The Home Dock will also charge your Radio's battery so its always ready to go.
listen. Press Options to set a
Channel Name
Channel Number
The Home Dock is also the best place to record your favorite XM programming. As long as your docked
channel as a Favorite.
Radio is powered, and receiving a good signal, you can record programming. Even when your Radio is
Artist or Program Name
Song Title or
powered off, it will wake up for scheduled recordings and store them in My Music Library.
or Sports Teams/Score
Program Topic or
Replay Live XM
Game Time/Game Details
Current listening position
Timeline
Portable
Press Play/Pause (
),
Time elasped since
Rewind ( ), Fast-Forward ( )
Length of content
beginning of playback
Use the XMp3i as a portable Radio to listen to Live XM, recorded XM programming, or your downloaded
to pause and replay up to the
being played
MP3 and WMA music files and audio books wherever you go.
last 30 minutes of Live XM.
When in Replay
To listen to Live XM, your XMp3i needs to have a clear view of the sky to receive the satellite signal.
Trees, buildings and even your own body can block this signal causing audio interruption. If you lose the
satellite signal, XMp3i will prompt you to listen to content from My Music Library or Auto Recordings.
Record Live XM
Press and hold Record ( rec ) to record the song to which you are listening. You can record up to 10 hours of
songs and listen to them later in My Music Library.
The XMp3i also records XM programming in other ways, and can record up to five
separate channels simultaneously. While listening to any channel, press Record (
rec ) to see the recording options:
• Record Channel: Record the channel to which you are listening for up to 6
hours.
• Schedule Recording: Schedule a recording to start and end at a specific
time in the future.
• Set to Auto Record: Select the channel to which you are listening for Auto
Recordings.
For recordings to happen and finish, the XMp3i must be receiving the XM signal and be in Live XM mode.
Additionally, for Scheduled Recordings and Auto Recordings, the XMp3i must be docked in a Home Dock or
Vehicle Dock which is connected to a power source.
Listen to My Music Library
Listen to all your XM recordings, MP3s and WMAs, and audio books stored on your
XMp3i. Turn the Control Wheel to highlight a song (or other content) and press
Select to play.
You can browse the recorded and downloaded content by song, artist, channel,
category, or album, and more. My Music Library gives you options to shuffle
songs, create playlists, and manage your recordings.

Advertisement

loading

Summary of Contents for Audiovox XPMP3H1

  • Page 1 Pick a Spot for Your Home Dock Connect the Home Dock Finding the XM Signal Activation Using Your XMp3i Use Your XMp3i At Home or On-The-Go (continued) (continued) Listen to Live XM At Home or Office When installing the Home Dock in your Use the provided Stereo Audio Cable and connect the single 1/8”...
  • Page 2 Using your XMp3i with a PC What’s in the Box? Button Functions and Home Dock Connections XMp3i™ Buttons and Connectors XM2go Music Manager Download the XM2go Music Manager software and installation instructions from: Quick Start Guide Headphone Jack and http://www.xmradio.com/xm2gomusicmanager microSD Card Slot The XM2go Music Manager software runs on a Microsoft®...

This manual is also suitable for:

Xmp3i