Internal Antennas; Regulatory Domains; Countries Supported - Cisco Aironet 2600 Getting Started Manual

Hide thumbs Also See for Aironet 2600:
Table of Contents

Advertisement

These antennas are supported on the 2602E:
Antenna Part Number
AIR-ANT2524DB-R
AIR-ANT2524DW-R
AIR-ANT2524DG-R
AIR-ANT2524V4C-R
AIR-ANT2544V4M-R
AIR-ANT2566P4W-R

Internal Antennas

The 2602I model access points are configured with up to four dual-band inverted-F antennas and two
2.4-GHz/5-GHz dual-band radios.
There are four antennas deployed inside the access point with one deployed on each corner of the
access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single
feed line. The basic features are as follows:
• Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.
• Antenna unit integrated into 2602I model access points.
• Peak gain is approximately 4 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz
band.

Regulatory Domains

The 2600 series supports the following regulatory domains (shown as "x" in the model numbers):
• -A, -C, -E, -I, -K, -N, -Q, -R, -S, -T, -Z

Countries Supported

Click this URL to browse to a list of countries and regulatory domains supported by the 2600:
www.cisco.com/go/aironet/compliance
6
Antenna Type
Dual-resonant black dipole
Dual-resonant white dipole
Dual-resonant gray dipole
Dual-resonant, ceiling-mount omni
(4-pack)
Dual-resonant omni (4-pack)
Dual-resonant Directional antenna
(4-pack)
Antenna Gain 2 GHz / 5 GHz
(dBi)
2/4
2/4
2/4
2/4
4/4
6/6

Advertisement

Table of Contents
loading

Table of Contents