Ap Model Numbers And Regulatory Domains; Antennas And Radios; Internal Antennas - Cisco Catalyst 9166I Series Installation Manual

AP Model Numbers and Regulatory Domains

AP Model Numbers and Regulatory Domains
AP Type
Access Point for indoor environments, with

internal antennas

Verify whether the AP model you have is approved for use in your country. To verify approval and to identify
the regulatory domain that corresponds to a particular country, see
wireless/wireless-compliance-tool/index.html. Not all regulatory domains have been approved. As and when
they are approved, this compliance list is updated.
Note
The x in the model numbers represents the regulatory domain.

Antennas and Radios

The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst Wireless 9166I AP (CW9166I-x) has the following list of internal antennas:
• Four internal dual-band antennas with a dedicated 2.4-GHz radio and a 5-GHz radio
• Four internal dual-band antennas with a dedicated 6-GHz radio and a 5-GHz radio
• One internal single-band antenna with a dedicated 2.4-GHz IoT radio
• Two tri-band antennas with a dedicated 2.4 GHz, 5-GHz, and 6-GHz Aux radio
Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point Hardware Installation Guide
4
Product ID
CW9166I-A
CW9166I-B
CW9166I-E
CW9166I-F
CW9166I-Q
CW9166I-R
CW9166I-Z
CW9166I-ROW
CW9166I-MR
https://www.cisco.com/c/dam/assets/prod/
About the Access Point
Details
Wi-Fi 6E AP, tri-band, 802.11ax with internal a