Cisco DPC User Manual page 71

Field Name
Content Rule
Time Access Rule
Session Duration
Inactivity time
Available Rules
Current Used Rules
4024320 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Description
Select the Content Rule for the current user profile.
Content Rules must first be defined by going to the Rules
Configuration page. You can access the Rule
Configuration page by clicking the Basic Rules link
under the Parental Control section of the Setup page.
Select the Time Access Rule for the current user profile.
Time Access Rules must first be defined by going to the
Time of Day Filter page. You can access the Time of Day
Filter page by clicking the Time of Day Rules link under
the Parental Control section of the Setup page.
1440 minutes (factory default).
Enter the amount of time in minutes that the user will be
granted Internet access beginning at the time they sign
on using their user name and password.
Note: Set the Session Duration to 0 (zero) to prevent
session timeout.
60 minutes (factory default).
Enter the amount of time during a user session where
there is no Internet access activity, indicating that the
user is no longer online. If the inactivity timer is
triggered, the user session will be closed automatically.
In order to regain Internet access, the user must log in
again with their user name and password.
Note: Set the Inactivity time value to 0 (zero) to prevent
timeout due to inactivity.
Lists available rules. Apply a rule by selecting it from the
list and adding it to the current user profile.
Note: This field appears only if rules have been created.
Create rules using the Parental Control Setup pages that
follow next.
Lists rules in use for the current user profile. You can
apply a maximum of four rules to each user profile.
Note: This field appears only when a rule is associated
with a user profile.
71