Removing Module - Fujitsu Siemens Computers C Series Easy Manual

Working with the notebook
You can replace modules during operation. This means you do not need to switch off the
i
notebook.
To replace a module, simply click on the corresponding icon in the taskbar and then on
Exit or Select - Exit.
Then you can simply remove the module.

Removing module

Ê
Place the notebook on a flat surface.
Ê
Pull the eject lever (1) in the direction of the arrow up to the stop.
The module now extends somewhat beyond the casing.
Ê
Pull the module (2) out of the module bay.
40
1
2
A26391-K136-Z120-2-7619