GE AST10 Owner's Manual & Installation Instructions page 14

WindowInstallationInstructions.
Install the Security Bracket and the Foam Top Window Gasket
[] Attach the security bracket with a type B screw. [] Cut the foam top window gasket to the
window width.
[] Stuff the foam between 1he glass and 1he
window to prevent air and insects from getting
into the room.
Install the Air Conditioner in the Case
]Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier on
each side of the case.
[]Place the _x)ttom inner case gasket be_veen Ihe
botlom of the air conditioner and the inside
bottom of din case. Fold up the ends on t×)th
sides and push them in.
] Attach the front gTille to the case by inserling
the labs on 1he gTille into the slots on the
front of the case. Push the grille in until it
snaps into place,
Front of air
conditioner.
Bottom inner
casegasket
Guide the lever carefully
through the grille as you
push it in,
f
]Secure flae front _ille to the case by replacing
the screw removed in Step 3A, Ifa screw was
not removed in Step 3A, secure the grille to
the case with a Type D screw.
The inslallation is now complete,
14