Cadillac 2011 DTS Owner's Manual page 170

Hide thumbs Also See for 2011 Cadillac DTS:
Table of Contents

Advertisement

Press to turn the cruise control system on
or off.
vehicle resume to a previously set speed or press and
hold to accelerate.
Press to set the speed and activate cruise
control or make the vehicle decelerate.
Press to disengage cruise control without
erasing the set speed from memory.
4-12
The cruise control buttons
are located on left side of
the steering wheel.
Press briefly to make the
If the cruise button is on when not in use, it could get
bumped and go into cruise when not desired. Keep the
cruise control switch off when cruise is not being used.
The cruise light on the instrument panel cluster comes
on after the cruise control has been set to the desired
speed.
1. Press
.
2. Get up to the speed desired.
3. Press the SET button located on the steering
wheel and release it.
4. Take your foot off the accelerator.
If the cruise control is set at a desired speed and then
the brakes are applied, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle speed is 40 km/h (25 mph) or greater,
press the +RES button on the steering wheel. The
vehicle returns to the previously set speed and stays
there.
If you press and hold the +RES button, the vehicle
speed increases until the button is released or the
brake is applied. Do not hold in the +RES button,
if you do not want the vehicle speed to increase.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents