Related Manuals for NETGEAR JGS524FNA
Summary of Contents for NETGEAR JGS524FNA
-
Page 1: Installation Guide
Full_IG.book Page 1 Monday, January 9, 2012 6:11 PM ProSafe 24 Port Gigabit Switch Installation Guide... - Page 2 NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US only): 1-888-NETGEAR...
-
Page 3: Package Contents
Full_IG.book Page 3 Monday, January 9, 2012 6:11 PM Package Contents Verify that all items are in the box. The package includes: • ProSafe 24-port Gigabit Switch with 2 Gigabit SFP Combo Ports JGS524F V1 • Power cord with localized plug •... -
Page 4: Select A Location
Full_IG.book Page 4 Monday, January 9, 2012 6:11 PM Select a Location Decide where you want to place the switch. Find a flat horizontal surface or a 19-inch rack. Make sure that the location is: • Not in direct sunlight or near a heater or heating vent. •... -
Page 5: Inch Rack Mounting
Full_IG.book Page 5 Monday, January 9, 2012 6:11 PM 19-Inch Rack Mounting Use the rack-mount kit supplied with your switch. Use the Phillips head screws to fasten the mounting brackets to the sides of the switch. Tighten the screws with a No. 1 Phillips screwdriver. - Page 6 Full_IG.book Page 6 Monday, January 9, 2012 6:11 PM Optical Modules (Sold Separately) You can use compatible optical modules such as the NETGEAR ProSafe GBIC SFP Modules AGM731F and AGM732F with your switch. These modules provide full-duplex 1000 Mbps Ethernet operation in each direction for NETGEAR switches.
- Page 7 Full_IG.book Page 7 Monday, January 9, 2012 6:11 PM Install an Optical Module Insert the module firmly into the slot that supports the SFP interface. You should hear a click when the module is firmly seated. Remove an Optical Module Release the module latch by pulling down the handle bar across the module, and pull the module out of the module slot.
-
Page 8: Troubleshooting
Full_IG.book Page 8 Monday, January 9, 2012 6:11 PM Troubleshooting You can use the LEDs to troubleshoot hardware problems. Power LED Is Off The switch has no power. • Make sure that the power cord is securely connected to the switch. - Page 9 Full_IG.book Page 9 Monday, January 9, 2012 6:11 PM Gigabit switch technical specifications Standards compatibility IEEE 802.3z 1000BASE-X Gigabit over fiber, IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u, 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3x flow control, IEEE 802.1p priority, DSCP priority Network interfaces RJ-45-connectors for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interfaces...
- Page 10 Full_IG.book Page 10 Monday, January 9, 2012 6:11 PM Gigabit swtich performance specifications Frame filter/forward rates 14,880 frames/sec. max. for 10 M port 148,800 frames/sec. max. for 100 M port 1,488,000 frames/sec. max. for 1000 M port Frame forward rate 14,880 frames/sec.
-
Page 11: Technical Support
NETGEAR website is strongly recommended. Go to http://support.netgear.com for product updates and web support. For complete DoC go to the NETGEAR EU Declarations of Conformity website at http://support.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, go to http://support.netgear.com/app/answers/detail/a_id/2649. WARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on carpets. - Page 12 Full_IG.book Page 13 Monday, January 9, 2012 6:11 PM NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA December 2011...