10. To wind up the tape into the cassette, repeat steps 8
and 9.
n
On completely winding up the tape into the cassette,
the M gear will be tighten.
(Unthreading end state)
11. Check that the ME wire is slacken.
12. Open the lower control panel.
13. Turn the eject knob in the arrow direction of the label
until the cassette is completely ejected.
Label
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
Eject knob
1-17. Taking Out the Cassette in Tape Slacking
1-31