Sony EVI-HD7V Technical Manual page 28

EVI-HD7V/HD3V Command List (3/3)
Command Set Command
VideoSystem SET 5)
IR_Receive On
Off
On/Off
IR_ReceiveReturn On
Off
Information Display On
Off
Color system RGB
YPbPr
Pan-tiltDrive Up 3)
Down
Left
Right
UpLeft
UpRight
DownLeft
DownRight
Stop
AbsolutePosition
RelativePosition
Home
Reset
Pan-tiltLimitSet LimitSet
LimitClear
1) After an ACK to a One Push White Balance Trigger is sent until the operation is completed, "Not Executable" is sent as a reply when any
other commands are received.
2) Bright can be set only in Full Auto mode or Shutter Priority mode.
3) When the menu is displayed, this operation is ignored.
4) When other commands are received after a Completion notification for the Recall command is sent, "Command not executable" may be
returned for a maximum of 240 msec due to internal processing. In this case, please transmit the command again.
5) Can be configured when the SYSTEM SELECT switch at the rear of the camera is set to position 7.
Use one of the following methods to apply the settings.
• Turn off DC power, and turn it on again.
• Turn off power using the IR remote commander, and turn it on again.
• Send CAM_Power On and Off commands.
Command Packet
8x 01 06 35 00 0p FF
8x 01 06 08 02 FF
8x 01 06 08 03 FF
8x 01 06 08 10 FF
8x 01 7D 01 03 00 00 FF
8x 01 7D 01 13 00 00 FF
8x 01 7E 01 18 02 FF
8x 01 7E 01 18 03 FF
8x 01 7E 01 03 00 00 FF
8x 01 7E 01 03 00 01 FF
8x 01 06 01 VV WW 03 01 FF
3) 8x 01 06 01 VV WW 03 02 FF
3)
8x 01 06 01 VV WW 01 03 FF
3)
8x 01 06 01 VV WW 02 03 FF
3) 8x 01 06 01 VV WW 01 01 FF
3) 8x 01 06 01 VV WW 02 01 FF
3)
8x 01 06 01 VV WW 01 02 FF
3)
8x 01 06 01 VV WW 02 02 FF
3)
8x 01 06 01 VV WW 03 03 FF
8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 04 FF
8x 01 06 05 FF
8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
Comments
p Video format HD7V HD3V
0 1920 1080p/59.94 Yes No
1 1920 1080p/29.97 Yes No
2 1920 1080i/59.94 Yes No
3 1280 720p/59.94 Yes Yes
4 1280 720p/29.97 Yes Yes
5 640 480p/59.94 Yes Yes
(Letter Box)
8 1920 1080p/50 Yes No
9 1920 1080p/25 Yes No
A 1920 1080i/50 Yes No
B 1280 720p/50 Yes Yes
C 1280 720p/25 Yes Yes
IR(remote commander) receive ON/OFF
IR (remote commander) receive message via the VISCA
communication ON/OFF
For contents of messages, see page 30.
ON/OFF of the Operation status display of One Push
Trigger of CAM_Memory and CAM_WB
Color-reproduction format setting for VIDEO signals
VV: Pan speed 0 x01 (low speed) to 0 x18 (high speed)
WW: Tilt Speed 0 x 01 (low speed) to 0 x14 (high speed)
YYYY: Pan Position FA60 to 05A0 (center 0000)
ZZZZ: Tilt Position FE98 to 0168 (center 0000)
See page 37.
W: 1 UpRight 0: DownLeft
YYYY: Pan Limit Position FA60 to 05A0 (center 0000)
ZZZZ: Tilt Position FE98~0168 (center 0000)
Command List
Output
connetor
59.94 Hz DVI-D
system
50 Hz
system
28