Locations Of Controls - Sony EVI-HD7V Technical Manual

Main Unit
Front
Rear
1 Lens
2 Remote sensors
3 POWER lamp
4 STANDBY lamp
For detailed information on LED status of the POWER
lamp and STANDBY lamp, see "LED Status" on page 37.

Locations of Controls

Bottom
5 DC IN 12V connector
6 SYSTEM SELECT switch
This switch allows you to select the video format of the
signal to be output from the VIDEO OUT connectors.
Notes
• Be sure to set this switch before you turn on the power of the
camera. You can also set this switch in the standby mode of
the camera. After completing the setting, turn on the power
of the camera by connecting it to an AC outlet using the
supplied AC power adaptor and AC power cord, or by using
Locations of Controls
(Continued)
5