Bose Lifestyle 520 Home Theater Setup Manual page 16

System Setup
H. Connect the speaker cable to the type of speaker you have.
For Jewel Cube
Insert the plug into the speaker connector.
For Direct/Reflecting
Virtually Invisible
cube speakers:
Press the button and insert the wires. Connect
the red-collared wire to the red connector.
Connect the other wire to the black connector.
Notes:
• The rear speaker cables for Direct/Reflecting
cube speakers are webbed together. You can pull them apart as needed.
• Put the Acoustimass
– Upright (BEST) or on either side (ALTERNATE).
– With the front opening facing into the room.
– At least 18 in (45 cm) from any TV to avoid magnetic interference with the TV
image. Move it farther away if you still notice interference.
CAUTION:
• Do not put electronic media, such as video or audio tapes, on or next
to the Acoustimass
surrounding the module may erase some or all of the recorded material.
• DO NOT BLOCK the ventilation openings on the module. This can cause it
to overheat.
Ventilation
openings
I.
Congratulations! At this point you have set up the control console, the
Acoustimass module, and the speakers. You are now ready to turn on
®
your system and enter the interactive phase of the setup process using
the UNIFY intelligent integration system.
®
Continue with Box
16 - English
speakers:
®
and
®
single
®
module in its final position:
®
module for long periods of time. The magnetic field
®
4 on the next page.
and Virtually Invisible
®
single
®