Sony HT-CT260H Operating Instructions Manual page 26

Menu items
AUDIO
SYNC
(AV SYNC)
EFFECT
(SOUND EFFECT)
DUAL
(DUAL MONO)
TV AUDIO
HDMI
C.HDMI
(CONTROL FOR
HDMI)
P. THRU
(PASS THROUGH)
26
US
Function
You can delay the sound using this function when the image
is slower than the sound.

ON: Adjusts the difference between picture and sound.

OFF: No adjustment.
You can set the system's sound effects (sound field setting)
on/off.

ON: Enables the sound effects of the sound field.

OFF: The sound effects are disabled. You can hear sound as
it is recorded.
You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.

MAIN/SUB: Main sound is output from the left speaker and
sub sound is output from the right speaker.

MAIN: Plays back only the main channel.

SUB: Plays back only the sub channel.
Selects the TV sound to be output.

TV(HDMI): Select this setting when the system is connected
to a TV (ARC) jack of the TV with an HDMI cable.

OPTICAL: Select this setting when the system is connected
to a TV with the digital optical cable.

ANALOG: Select this setting when the system is connected
to a TV with an audio cable.

ON: Turns on the Control for HDMI function.

OFF: Turns off the function. Select this setting when you
want to connect equipment not compatible with the
Control for HDMI function.

ON: When the system is in standby mode, it always passes
HDMI signals through.

OFF: When the Sound Bar is turned off, the system does not
pass HDMI signals to a TV.