USAGE PRECAUTIONS
(1) V
and V
must be equal voltage.
CCRF
CCIF
Even if either RF-PLL or IF-PLL is not used, power must be supplied to V
equal. It is recommended that the non-use PLL is controlled by power saving function.
(2) To protect against damage by electrostatic discharge, note the following handling precautions :
Store and transport devices in conductive containers.
Use properly grounded workstations, tools, and equipment.
Turn off power before inserting or removing this device into or from a socket.
Protect leads with conductive sheet, when transporting a board mounted device
ORDERING INFORMATION
Part number
MB15F74UVPVB
Package
18-pin plastic BCC
(LCC-18P-M05)
MB15F74UV
and V
to keep them
CCRF
CCIF
Remarks
23