Storing And Using Presets - Belkin F8Z179TTP User Manual

Storing and Using Presets

1. To store a preset, select the desired frequency using "+" or "-" buttons. Push and hold the
memo button for 1 or 2 seconds until you hear a beep to store the station.
An audible beep sounds in the transmitted audio when the new frequency is
programmed.
2. To transmit over one of your preset frequencies, momentarily press "1" or "2".
This will instantly tune the FM transmitter to the frequency stored in that preset.
3. To recall a stored station, push the same memory button at any time.
Storing and Using Presets
| EN-4