Table of Contents
Advertisement
Back to Contents Page
Display
Dell™ Inspiron™ N4020/N4030 Service Manual
Display Assembly
Display Bezel
Display Panel
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Display Assembly
Removing the Display Assembly
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Follow the instructions from
4. Follow the instructions from
5. Remove the module cover (see
6. Remove the memory module(s) (see
7. Remove the keyboard (see
8. Remove the palm rest (see
9. Disconnect the antenna cables from the Mini-Card (see
10. Disconnect the display cable from the connector on the system board.
11. Remove the two screws (one on each side) that secure the display assembly to the computer base.
12. Lift and remove the display assembly out of the computer base.
Begin.
Battery).
step 3
to
step 4
in
Removing the Hard
step 3
to
step 5
in
Removing the Optical
Removing the Module
Cover).
Removing the Memory
Module(s)).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the
Removing the
Drive.
Drive.
Mini-Card) and remove the antenna cables from the routing guides.
Battery) before working inside the
Hide quick links:
Advertisement
Table of Contents
