Installing 2.5-Inch Hard Disc Drives - HP ProOne 600 Hardware Reference Manual
Hardware reference guide
Hide thumbs
Also See for ProOne 600:
- Illustrated parts & service map (4 pages) ,
- Hardware reference manual (40 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
Installing 2.5-inch hard disc drives
1.
Insert the 2.5-inch hard disc drive or drives into the 2.5-inch disc drive adapter. Be sure that the
connectors are at the opening of the adapter.
NOTE:
installed, it must occupy this position.
2.
Fasten the four mounting screws with grommets into the sides of the 2.5-inch drive adapter.
Figure 2-46
42
Chapter 2 Hardware repair and upgrade
The primary drive is the lower position in the drive adapter. If only one drive is to be
Securing the mounting screws into the 2.5-inch drive adapter
Hide quick links:
Advertisement
Table of Contents
