Operation
Lock Menu
Parental Control can be used to block specific channels,
ratings and other viewing soure.
Press MENU button and then use
selcet Lock menu.
Press
/OK button and then press digits button to
input the digits( The initial password is 0000) . The
menu will display as follows:
Tuning Lock
Press
/OK button to select Tuning Lock and
press
/
operation will be not available. When enter the Tuning
menu, Tuning Lock will be on the screen. If you want to
operate Tuning menu, you need to enter the Lock menu
Set Password
Press OK to enter the submenu , press digits button to
input the number of 0-9 twice in the New Password and
when you input the same number twice.
EN-15
TV LCD-TFT Owner's Manual
Block Program
Press OK button to enter the submenu, then press
/
button to
press the yellow buttonon the remote control the
channel will blocked, press the yellow button again to
cancel.
Parental Guideance
Press
children who will watch TV.
Clear Lock
Press
wil be cleared.
PC Set
Adjustment for screen Position, Clock, Phase
Display adjust menu by pressing INPUT button then use
Auto Adjust: This is used to reset the default setting
parameters (After the operation, Auto Adjusting will be
display on the screen).
Horizontal Pos. : Horizontal position of picture can be
adjusted in this item.
/
button to select a channel you want to blocked,
/OK button to selcet Parental Guideance. Press
/
/OK buttonto selcet Clear Lock , all lock options
/
button to select the source of PC item.
Press MENU button and then use
select the Adjust menu.
Press
/OK button and then use
adjust the options.
Auto Adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
/
button to
/
button to
Adjust