Advertisement
Connection Instructions
COMPONENT
(If connect ed to SVIDEO,select the SV ext ernal
input source.)
3. Refer to the DVD player's manual for operat ing inst ruct ions.
Component Input ports
To get bet t er pict ure qualit y, connect a DVD player to the component
input port s as shown below.
S-VIDEO Input
- T o avoid pict ure noise (int erference), leave an adequat e dist ance bet ween the
V CR and TV
Connection and use steps:
1.Read the user guide supplied with your A
S-Video connectors;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and Svideo cables
from the VCR's output jacks to the TV
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3
and then turn on the power of the A V
device;
4.Press the TV/AV button to set the video
.
input mode of the LCD-TV to SVIDEO
mode .
Y
Pb
Pr
V devices and ensure that it has
8
2
1
VCR
Advertisement
Chapters
