Time Shift; Recording - Haier KGNFHD32HVAA User Manual

Note
The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
F
Format may take several minutes and the time is
depending on the memory size. Press
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press OK button to save.
Note
If you select all the size format for time shift, you
can not do any recording.
G
Waiting for the system checking. And you can see
the speed data after the success checking.
Note
Only have to format when you use the device for
record for the first time.
The minimum device size for record is 1GB. Provide
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Bit rate:
Device bit-rate>4.5MB/s REC is safe at HD
stream
Device bit-rate>1.5MB/s REC is safe at SD
stream
Device bit -rate<600KB/s REC is bad for REC
The system can not work normally if the USB
device have the listing problem below:
The device has bug.
The device has error block.
The device reports the unfaithful size.
IMPORTANT
USB device should be format as FAT32 format by
your PC before insert to the USB connector.

TIME SHIFT

button
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the STOP button.

RECORDING

A
Press D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.
B
Press STOP button to stop the program recording
being played.
C
For Playback the recorded program. Press
button to open the recorded list.
Digital LCD Television Instruction Manual EN-26
Using the features
INDEX