19) The Television shall not be exposed to dripping or splashing and that no objects filled with liquids, such as Haier is committed to safely recycling electronic vases, shall be placed on the Television. products and product materials. Please check for a...
Page 4
SAFETY AND WARNINGS High voltages are used in the operation of this television Never stand on, lean on, or suddenly push the television or receiver. Do not open the cabinet. its stand. You should pay special attention to children. Refer servicing to qualified service personnel. Serious injury may result if it falls.
INTRODUCTION Main features Accessories Accessories Integrated ATSC TV tuner for HDTV broadcast reception Power cable........■ High brightness provides a vivid and brilliant picture ■ Infrared Remote Control....Deeper blacks and brighter whites with high contrast ■ Wide Screen aspect ratio (16:9) for a complete home ■...
Base Stand Assembly Instruction 1. Place the TV with the display side down on a flat surface. Use a cloth to protect the display. Insert the TV stand leg into the bottom of the TV cabinet– please ensure that the legs of the TV stand are pointed outward with and with the longer leg pointed toward the front of the TV.
WALL MOUNT INSTALLATION INSTRUCTIONS When attaching the wall mount screws into the back of the TV, use the maximum torque of 8 kilogram force centimeter. The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. The recommended wall mount screw is M6 with an approximate length of 8mm.
INSTALLATION Front panel Panel keys SOURCE MENU V- CH- CH+ Standby 1.SOURCE: Display the input source menu. 2.MENU: Display main MENU. 3.V-/V+ Adjust sound level. In MENU mode, press“V+”or“V-”to 1: Remote control sensor. adjust the item that you selected. 4.CH-/CH+ 2: Indicator LED: RED STANDBY.
Page 9
INSTALLATION ANTENNA Note: Aerial connections: IEC (female). Input impendance: 75 unbalanced. STEPS: Be sure both the TV and computer are powered off. 1.Connect a VGA and audio cable. 2.Connect the power cord. 3.Turn on the TV, switch to PC mode. 4.Turn on the PC.
Page 11
INSTALLATION AV EQUIPMENT There are three HDMI ports located on the back of your TV. You can connect a Blu-ray player, DVD player, or other video equipment through these ports. The HDMI2 port is MHL enabled. You can connect MHL devices, such as the compatible mobile phones and tablets.
REMOTE CONTROL 1.Press to turn on and off the TV. 2.USB: Press to launch the USB multimedia mode. 3.Select a closed caption option. 4.Press to input a channel. 5.Press to select the digital sub-channels.For example, to enter “54-3”, press“54”,“●”, and then “3”. 6.Press CH or CH to go to the next or previous channel...
OPERATION 1. PICTURE MENU Note: In this menu, you can adjust the picture options, Audio language is available in ATSC/TVmode only. such as contrast, brightness, etc. Auto volume is available only when the input signal Press to select, press OK to adjust. volume is too large or there is distortion.
Page 14
OPERATION 4.LOCK MENU And use the key to lock/unlock Parental In this menu, you can change the password and adjust Controls the vchip settings. Enter the password, to enter the lock menu. The 2) MPAA: Switching the movie-rating control level; factory default password is 0000.
You can display the Music and Photo fil s by using the violent scenes and extreme violence. USB port that is located on the rear panel: 4.5 RRT setting Haier Innovation Life ATSC digital TV mode, it can be adjusted 4.6 Reset RRT: Press to reset the RRT settings to the factory default values.
TROUBLE SHOOTING microwave, electronic equipment, car/motorcycle, fluorescent light Component (Y Pb Pr) connections The LCD TV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white.
Need help?
Do you have a question about the 32e3000 and is the answer not in the manual?
Questions and answers