Fujitsu LifeBook S6110 Bios Manual page 7

Lifebook s series
Hide thumbs Also See for LifeBook S6110:
Table of Contents

Advertisement

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
LBA Mode
Disabled
Control:
Enabled
PIO Transfer
Standard
Mode:
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
DMA Transfer
Disabled
Mode:
Multiword DMA 1
Multiword DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
Ultra DMA 3
Ultra DMA 4
Ultra DMA 5
C A U T I O N
A bootable CD-ROM may have either a floppy disk or
hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically with-
out changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A.
The CD-ROM will only take drive C: (hard drive for-
mat) if the internal hard drive is not present or is dis-
abled. The bootable CD-ROM can never use a C:
designation if a formatted internal hard drive is
present since the C: designator is always reserved for
the internal hard drive.The boot sequence ignores the
new drive designations, however, your application
software will use the new designations.
Be careful of the operating environment when boot-
ing from a CD-ROM or you may overwrite files by
mistake.
Default
Description
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the num-
ber of sectors per block for multiple sector transfer.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
[Fast PI0 4]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected. Multi-word DMA is automatically set to
mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast
PIO 4 / DMA.
[Ultra DMA 5]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
7
M a i n M e n u

Advertisement

Table of Contents
loading

Table of Contents