Fujitsu LifeBook S6110 Bios Manual page 24

L i f e B o o k S S e r i e s N o t e b o o k B I O S
Table 15: Fields, Options and Defaults for the Security Menu
Menu Field Options
Supervisor –—
Password is:
User Password is: –—
Set Supervisor [Enter]
Password
Set User Password [Enter]
Minimum User [0]
Password Length:
Password on Boot: Disabled
First Boot
Every Boot
KB Lock on Disabled
Resume:
Enabled
Boot from All
Removable Media:
Supervisor only
Floppy Disk All
Access:
Supervisor only
Hard Disk Security: –—
Owner –—
Information:
Hard Disk Boot Normal
Sector:
Write Protected
Security Panel On Disabled
Reume
Enabled
Default Description
Clear A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
Clear A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
[Enter] Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to seven characters long and include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New Pass-
word field and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
[Enter] This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
[0] Sets the minimum length for User Password.
[Disabled] When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read from
a disk. When set to Disabled no password is required. If no Supervisor
Password is set this feature is not available and no password is required.
[Disabled] When set to Enabled, the PS/2 keyboard and mouse inputs are locked
out upon unattended boot via LAN until the password is entered. When
both passwords are set, the User password is always used to lock. Pass-
word entry before OS boot is disabled upon unattended boot.
[All] Enable password allows supervisor access only.
[All] Enable password allows supervisor access only.
–— Configures hard disk security features.
–— Sets Owner information.
[Normal] Sets protection mode for hard disk drive.
[Enabled] Allows the Security Panel Feature to be enabled or disabled upon
Suspend from Resume.
24