Table of Contents
Advertisement
L i f e B o o k S S e r i e s N o t e b o o k B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Main
Type:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
SuperDisk
Hard Disk
Cylinders:
A number between
0 and 65,535
Heads:
A number between
1 and 16
Sectors:
A number between
0 and 63
Maximum
Display only
Capacity:
PhoenixBIOS Setup Utility
Primary Master [TOSHIBA MK4018GAP -(PM)]
[Auto]
40008MB
[16 Sectors]
[Enabled]
[Fast PIO 4]
[Ultra DMA 5]
Select Item
Select Menu
Figure 2. Primary Master Submenu
Default
[Auto]
–—
–—
–—
–—
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
-/Space
Change Values
Enter
Select
Sub-Menu
Description
Selects the ATA/ATAPI device type. Select Auto to have the type auto-
matically identified by the BIOS at POST. If None is selected, all of the
following Set-up items do not appear. Select CD-ROM if a CD-ROM
drive is installed at this connection. Select SuperDisk if a SuperDisk drive
is installed at this connection. If Hard Disk is selected, you must specify
the number of Cylinders, Heads, and Sectors for the drive.
This item appears only when Hard Disk Auto is selected. This field is
changed by incrementing (pressing the [Spacebar]) or by typing in the
number.
This item appears only when HArd Disk. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
This item appears only when Hard Disk is selected. This field is changed
by incrementing (pressing the [Spacebar]) or by typing in the number.
Displays the maximum capacity of the drive calculated from the parame-
ters of the hard disk when Auto or Hard Disk are selected.
6
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F9
Setup Defaults
F10
Save and Exit
Advertisement
Table of Contents
