Table of Contents
Advertisement
L i f e B o o k N S e r i e s N o t e b o o k B I O S
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
Information
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Change and Power Off
Table 15: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Exit Saving Changes will store the entries on all setup utility menus to the BIOS memory and then exit the setup utility.
A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed.
Changes
Exit Discarding
Selecting Exit Discarding Changes will exit the setup utility with out writing to the BIOS memory. When the BIOS recog-
Changes
nizes this selection it will load the operating system and begin operation.
Load Setup
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Defaults
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load pre-
Discard
vious now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To return
Changes
to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
Save Changes
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
Save Changes
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, after
which the system will power itself off. The message Save configuration changes and power off now?
and Power Off
[Yes] [No] will be displayed. When confirmed, the setup utility save the settings and the system will power off.
22
InsydeH20 Setup Utility
Main
Advanced
Security
Figure 15. Exit Menu
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Boot
Exit
Exit System Setup and
save your changes.
Up/Dn Select Boot Device
<>
Select Screen
Select Item
Enter Select
F1 = Help
F9 = Setup Defaults
F10 = Save and Exit
Esc = Exit
Submenu
Advertisement
Table of Contents
