Table of Contents
Advertisement
Audible System Tone Settings
These options are used when you use the dialing pad, make
a screen selection, lock your screen, or tap the screen. Each
time you press a key or make a selection the selected tone
sounds.
1. From the Home screen, press
Settings
Sound.
2. Tap Keytones to activate a tone when you use on-
screen keys. A check mark displayed next to these
features indicates active status.
3. Tap Touch sounds to activate a tone when you touch the
screen. A check mark displayed next to this feature
indicates active status.
4. Tap Screen lock sound to activate a tone when you use
the Lock screen. A check mark displayed next to this
feature indicates active status.
5. Tap Haptic feedback to activate the a vibration when
you press soft keys on certain screens. A check mark
displayed next to the feature indicates this feature is
active.
Display Settings
Adjusting the Screen Display
and then tap
In this menu, you can change various settings for the display
such as the font, orientation, pop-up notifications, puzzle
lock feature, animation, brightness, screen timeout, and
power saving mode.
1. From the Home screen, press
Settings
Display.
2. Configure the following screen display settings:
• Wallpaper: allows you to set the Wallpaper for your Home
screen, Lock screen, or both.
• LED indicator: allows you to turn on your LED lights for
charging, low battery, incoming notifications, and voice
recording. The light will turn on by default unless you turn them
off.
• Brightness: adjusts the on-screen brightness level. For more
information, refer to "Adjusting Screen Brightness" on
page 303.
and then tap
Changing Your Settings
301
Advertisement
Table of Contents
