Table of Contents
Advertisement
–
Tap the entry from your device's AllShare Cast screen and
confirm connection.
AllShare Cast Hub - Streaming Videos
The hub supports streaming of purchased media content that
contains DRM (Digital Rights Management).
Note: You can control the volume level of your playback file
being shown on your TV by using your device's Volume
buttons. For additional volume, use your TV's volume
controls.
To stream video content to your Tv via AllShare Cast Hub:
1. Connect your AllShare Cast Hub to your TV. For more
information, refer to "Connecting AllShare Cast Hub"
on page 205.
2. Verify your TV is set to the same source as your hub
and that you can see the on-screen connection and
configuration tutorials.
3. On your device, press
Settings
More settings
and then tap
AllShare Cast.
4. In a single motion touch and slide the AllShare Cast
slider to the right to turn it on. A list of available hubs
will appear on the screen.
5. Press the RESET button on the back of the hub once
(LED turns blue) and tap the dongle entry from your
device's list.
– or –
If reconnecting, verify the hub's LED is blinking red and
then tap the dongle entry from your device's list.
6. Verify
(AllShare Cast Hub Communicating) appears
at the top of the device's screen.
7. Verify the previous
(Wi-Fi Direct Communicating).
8. To playback a user-created video:
• From the Home screen, tap
(Gallery).
• Locate your video and tap it to begin playback. Your TV now
shows the video
(Wi-Fi Direct On) now displays
(Apps)
Multimedia
209
Advertisement
Table of Contents
