ASROCK Z87 Extreme4 User Manual page 30

BIOS Selection Jumper
(BIOS_SEL1)
Default
Backup BIOS
(see p.11, No. 16)
(Main BIOS)
This motherboard has two BIOS onboard, a main BIOS (BIOS_A) and a backup
BIOS (BIOS_B), which enhances protection for the safety and stability of your
system. Normally, the system works on the main BIOS. However, if the main
BIOS is corrupted or damaged, please use a jumper cap to short pin2 and pin3,
then the backup BIOS will take over on the next system boot. After that, short
pin1 and pin2 again, then use "Secure Backup UEFI" in the UEFI Setup Utility to
duplicate a working copy of the BIOS files to the primary BIOS to ensure normal
system operation. For safety issues, users are not able to update the backup BIOS
manually. Users may refer to the BIOS LEDs (BIOS_A_LED or BIOS_B_LED) to
identify which BIOS is currently activated.
24