Optus Zoo; How To Connect To Optus Zoo - LG U8210 User Manual

6. Optus zoo

How to Connect to Optus zoo

(Internet Settings)
1. Setup (Default)
- User can connect to Optus zoo or Internet using
one of the settings values configured in Optus zoo
"Settings" menu's Account list
- The list of setting values can be seen by selecting
"Setting"menu's "Accounts" sub menu
- The default item used to connect to Optus zoo is
displayed with check icon "√ " on the right side of
the list.
- The Optus Corporation provides pre-configured
parameters, which can only be viewed.
- Users can add or edit settings.
- To change the default connection settings, select
one of the items listed in the settings menu and
press "OK" center key. The selected item will be
displayed with check icon "√ " on right hand side
of the selected list.
2. Additional Setup
- Select "Settings" menu' from "Optus zoo" "menu",
Select next menu "Accounts". Open "Options"
menu by pressing Left Soft Key and select "Add"
option.
The following items need to be configured
Account Title Settings profile name (eg. Optus zoo)
Connection Mode Choose from given list of connection
modes. (default is UDP(Co))
Proxy IP address WAP Gateway IP address provided by the
operator.
Proxy Port Port details are provided by operator,
depending upon "Connection Mode".
Security Choose "Secure" connection if needed,
Default value is "Non-secure".
Timeout Linger time setting
(150 seconds as a default)
Primary Access point setting for the
access point corresponding service. (eg. Optus zoo 3G)
(More details for adding or editing new
Secondary
access point Access Point refer step 3)
- Press "Done" right soft key to save any configuration
changes.
71