Fingerprint Sensor Device; Introducing The Fingerprint Sensor Device; Getting Started; Installing Omnipass - Fujitsu LifeBook E8110 User Manual

E8110.book Page 103 Tuesday, February 28, 2006 2:59 PM

Fingerprint Sensor Device

INTRODUCING THE FINGERPRINT
SENSOR DEVICE
Your system has an optional fingerprint sensor device
below the Touchpad, between the left and right buttons.
This also serves as a scroll button. (Figure 1)
Figure A-1 Fingerprint sensor
Although the system may have a
fingerprint sensor in place of a scroll
button, the fingerprint sensor can be used
for scrolling. Simply move your fingerprint
over the sensor the same as you would use
a scroll button.
With a fingerprint sensor, you can avoid having to enter
a username and password every time you want to:
Log onto Windows
■
Recover from suspend mode
■
Cancel a password-protected screen saver
■
Log into homepages that require a username and pass-
■
word
After you have "enrolled" - or registered - your finger-
print, you can simply swipe your fingertip over the
sensor for the system recognize you.
The fingerprint sensor uses Softex OmniPass which
provides password management capabilities to
Microsoft Windows operating systems. OmniPass
enables you to use a "master password" for all Windows,
applications, and on-line passwords.
OmniPass requires users to authenticate themselves
using the fingerprint sensor before granting access to the
Windows desktop. This device results in a secure
authentication system for restricting access to your
computer, applications, websites, and other password-
protected resources.
OmniPass presents a convenient graphical user interface,
through which you can securely manage passwords,
users, and multiple identities for each user.
U s i n g t h e F i n g e r p r i n t S e n s o r

GETTING STARTED

This section guides you through the preparation of your
system for the OmniPass fingerprint recognition
application. You will be led through the OmniPass
installation process. You will also be led through the
procedure of enrolling your first user into OmniPass.

INSTALLING OMNIPASS

If OmniPass has already been installed on your system,
skip this section and go directly to "User Enrollment" on
page 104. You can determine whether OmniPass has
already been installed by checking to see if the following
are present:
The presence of the gold key-shaped OmniPass icon in
■
the system tray at the bottom right of the screen.
The presence of the Softex program group in the
■
Programs group of the Start menu
System Requirements
The OmniPass application requires space on your hard
drive; it also requires specific Operating Systems (OS's).
The minimum requirements are as follows:
Windows XP Professional operating system
■
At least 35 MB available hard disk space
■
Installing the OmniPass Application
If OmniPass is already installed on your system, go to
"User Enrollment" on page 104. Otherwise continue
with this section on software installation.
For installation, OmniPass requires that the
user installing OmniPass have
administrative privileges to the system. If
your current user does not have
administrative privileges, log out and then
log in with an administrator user before
proceeding with OmniPass installation.
To install OmniPass on your system you must:
1. Insert the installation media for the OmniPass appli-
cation into the appropriate drive. If you are
installing from CD-ROM or DVD-ROM, you must
find and launch the OmniPass installation program
(setup.exe) from the media.
2. Follow the directions provided in the OmniPass
installation program. Specify a location to which
you would like OmniPass installed
mended that you NOT install OmniPass in the root
directory (e.g. C:\).
3. Once OmniPass has completed installation you will
be prompted to restart you system. Once your
system has rebooted you will be able to use
OmniPass. If you choose not to restart immediately
after installation, OmniPass will not be available for
use until the next reboot.
It is recom-
.
103