Configuring Palo Alto Networks User-Id Services; Check Plugin Versions; Accessing Palo Alto Networks User-Id Services - Aruba Networks PowerConnect W Clearpass 100 Software Manual

4 Configuring Palo Alto Networks User-ID
Services

Check Plugin Versions

Pushing user identity information to a Palo Alto Networks firewall requires the following
Amigopod plugin versions:
•
Amigopod Kernel 2.1.7 or later
•
RADIUS Services Plugin 2.1.7 or later
•
Guest Manager Plugin 2.1.6 or later
•
Palo Alto Networks Networks Services 0.6.0 or later
To verify you have the correct plugin versions installed, navigate to Administrator >
Plugin Manager > Manage Plugins and check the version number in the list.
Use the Update Plugins link to download and install updated plugins.
It is assumed that the configuration steps required to integrate the chosen Wired or
Wireless Access Controller have been completed, tested and known to be working in
isolation from any of these integration steps.
For more information on integrating Wired and Wireless Access Controllers with the
Amigopod solution, please refer to our extensive database of detailed Integration Guides
with the leading manufacturers.

Accessing Palo Alto Networks User-ID Services

Log in to the Amigopod Visitor Management Appliance's graphical user interface as an
administrator.
Navigate to Administrator > Plugin Manager > Manage Plugins and you will find the
installed Palo Alto Networks Services Plugin.
Ensure that the plugin is Enabled as shown above.
8| Palo Alto Networks User-ID Services Amigopod |Technical Note