Configuring User-Id Agent Definition - Aruba Networks PowerConnect W Clearpass 100 Software Manual

Palo alto networks user-id services technote

Hide thumbs Also See for PowerConnect W Clearpass 100 Software:

Table of Contents

Configuring User-ID Agent Definition

From the Device > User Identification screen click Add under the User Identification

Agent section shown below:

From the resulting screen enter the IP Address details of the Windows Host you have

installed the Palo Alto Networks User-ID Agent software. In our test environment the

Windows host has an IP Address of 10.0.20.53.

A port must also be defined for communications between the Palo Alto Networks firewall

and the User-ID Agent software on the Windows host. Ensure to make note of your chosen

port number as this configuration will need to be matched on the User-ID Agent

configuration in the subsequent section.

Also this port will need to be permitted through any Access Control Lists or Firewall rules

that may exist elsewhere on the network between these two devices or potentially on the

host based firewall running on the Windows host.

Amigopod |Technical Note

Palo Alto Networks User-ID

Services|11

Table of Contents

Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?

Palo alto networks