AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual page 8

In order for the Bluesocket to successfully authenticate the guest users that will be provisioned
on the Amigopod system, a RADIUS definition needs to be defined on the BlueSecure
controller. From the User Authentication Authentication Servers Create External Radius
Authentication menu option in the top right corner, please create a new RADIUS authentication
server.
Enter the IP Address of your Amigopod deployment in the Server IP Address field. This can be
found on the console of the booted Amigopod software. There is no need to change the default
RADIUS Port Number as this is the default port used by amigopod.
Enter and make note of the NAS Identifier and Shared Secret used for authenticating the
controller to the Amigopod RADIUS server as this will be required during the configuration of the
Amigopod software. Also, make sure that the Enable Server check box is selected so that this
RADIUS definition can be used to authenticate the Visitor transiting through the BlueSecure
Controller.
Please select the accounting server created in step 2 of this document.
Completing the Mapping RADIUS Attribute to roles or selection of Default role is required to
complete this Bluesocket form.
Click the Save button to save the changes.
8
CONFIDENTIAL