Docking Problems; Floppy Disk Drive Problems; Hard Drive Problems; Keyboard Or Mouse Problems - Fujitsu LifeBook E-6570 User Manual

Problem
The DVD/CD-ROM Access
indicator on the Status
Indicator Panel blinks at
regular intervals when no
DVD/CD is in the tray or
the DVD drive is not
installed.

Docking Problems

LifeBook does not turn
on when installed in
Docking Station.

Floppy Disk Drive Problems

You cannot access your
floppy disk.

Hard Drive Problems

You cannot access your
hard drive.

Keyboard or Mouse Problems

The built-in keyboard does
not seem to work.
Possible Cause
The Windows DVD/CD Auto
Insert Notification function is
active and is checking to see if
a DVD/CD is ready to run.
LAN Dock AC adapter is not
plugged in.
LifeBook is not properly seated
in the LAN Dock.
You tried to write to a write
protected floppy disk.
Floppy disk is not
loaded correctly.
BIOS setup utility states
Diskette Controller:
Disabled.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.
The setup utility is incorrectly
set for your internal (Primary
Master) or optional second
hard drive (Primary Slave).
The wrong drive designator
was used by an application
when a bootable CD-ROM was
used to start the LifeBook.
Security is set so your oper-
ating system cannot be started
without a password.
The LifeBook has gone into
Suspend mode.
T r o u b l e s h o o t i n g
Possible Solutions
This is normal. However, you may disable this
feature. (See Auto Insert Notification Function (only
in models with Windows 98 Second Edition) on
page 55 for more information)
Provide power to the LAN Docking Station.
Remove and re-dock your LifeBook and verify that
the Docked LED illuminates.
Eject the floppy disk and set it to write enable. (See
SuperDisk 120 or Floppy Disk Drive on page 49 for
more information)
Eject floppy disk, check orientation and reinsert.
(See SuperDisk 120 or Floppy Disk Drive on page 49
for more information)
Revise the setup utility Main menu settings to
enable Diskette Controller. (See BIOS Setup Utility
on page 39 for more information)
Remove and reinstall your floppy disk drive. (See
Flexible Bay Devices on page 25 for more information)
Verify your password and security settings.
Revise BIOS settings to set both Primary Master
and Primary Slave correctly. (See BIOS Setup Utility
on page 39 for more information)
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power and Suspend/Resume button.
71