Table of Contents
Advertisement
Chapter - Software Reference
Scanning... : The station is trying to authenticate and associate with an access
point or Ad Hoc node.
Disconnected: The WLAN Card is installed to the system, but not yet
connected to a wireless device.
SSID:
Displays the Service Set Identifier (SSID) of the device that the card is
either associated or intending to join.
MAC address:
address is a unique identifier for networking devices (typically written as twelve
hexadecimal digits from 0 through 9 and A through F separated by colons, i.e.
00:E0:18:F0:05:C0).
Current Channel:
tuned. This number changes as the radio scans the available channels.
Current Data Rate:
(Mbps).
NOTE: For 02.11n performance, select 0MHz bandwidth in wireless
router. Channel option will depend on the bandwidth that you select.
Radio State:
Radio On - When the wireless radio is turned ON, the icon on the right
appears in the upper left of the Status page.
Radio Off- When the wireless radio is turned OFF, the icon on the right
appears in the upper left of the Status page.
Buttons
Rescan – Make the WLAN Card rescan all available devices. If the current link
quality or signal strength is poor, rescanning can be used to push the radio off
a weak access point and search for a better link with another access point. This
function usually takes several seconds.
Change SSID – Click this button to set the SSID to that of the AP you want to
connect.
Search & Connect – Click this button to connect to an available wireless AP.
1
Shows the hardware address of the WLAN Card. MAC
Displays the radio channel to which the card is currently
Displays the current data rate in megabits per second
Shows the wireless radio status: ON or OFF.
ASUS WLAN Card
Advertisement
Table of Contents
