Fujitsu PLASMAVISION PDS4229W User Manual page 30

• FEATURES setup screen has the
following 5 options.
Adjustment : Can make a fine adjustment of pictures such as Dot clock, Clamp position.
Function : Can make a function setting such as Gradation. (See P. 30.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. 30)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. 31 - 32.)
Others : Can make other settings. (See P. 32 - 35.)
ADJUSTMENT
• Adjusting Dot Clock (Dot clock)
You may find that pictures blur, depending on the clock frequency of your PC's processor. If you
experience blurring, you can obtain a clearer picture by adjusting the "Dot Clock".
Use or to select a value between -60 and +60.
Press to store.
• Adjusting Clock Phase (Clock Phase)
You may find that pictures blur, depending on the clock phase of your PC's processor. If you
experience blurring, you can obtain a clearer picture by adjusting the "Clock phase".
Use or to select "Auto" or "Manual".
Auto: Makes automatic adjustment.
Manual: Does not make automatic adjustment.
Use or to specify a value between 1 and 32.
Press to store.
• Eliminating Flicker (Vertical Sync)
Corrects the vertical synchronization signal timing to eliminate vertical flicker.
Use or to specify a value between -1 and +1.
Press to store.
• Adjusting Clamp Position (Clamp Position)
Adjusts clamp pulse in accordance with the input signal received from connected equipment.
Clamp pulse is automatically set at the optimal level when you do not use this option.
Use or to specify a value between -8 and 8.
Press to store.
• Selecting the Optimum Dynamic Range of Images (Auto Calibration)
Receives a white screen signal and adjusts the dynamic range of images to the optimum.
(1) Select Auto Calibration and press
Auto Calibration screen appears.
(2) Select Execute and press
Press or to select Yes or No.
Yes: Stores the data of Auto Calibration.
No: Disables the execution result of Auto Calibration.
(3) Press to execute.
* On-screen information disappears if you do not take any action for about 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode,
.
.
: Comp.video mode, : RGB-PC mode,
When selecting Manual by Clock Phase
"Auto Calibration" setting screen
"Yes/No" selection screen
: Decoder mode
29