HOW TO USE MENUS
SELECTING OPTIONS IN A MENU
Use the [MODE] button on the display or
1
Press
The main menu screen will appear.
2
Press
or
Each time you press
The corresponding menu screen will appear.
3
Press
or
A total of three different menus (PICTURE, POSITION/SIZE, FEATURES, FACTORY DEFAULT) are available.
You can easily distinguish between these menus as shown below.
PICTURE
POSITION/SIZE
*Press
,
,
or
to make adjustment/setup, and press
* Do not change input signals when any of the menus are displayed.
USING THE PICTURE MENU
When you finish selecting a desired option in the PICTURE menu screen, press
At this time, the adjustment/setup screen for that option will appear.
You can use
or
to change the value for the option. Press
Changes you make will be stored only for the selected mode.
PICTURE Menu screen (Video Input Mode)
18
and
on the remote control to select a desired input mode.
.
to switch between sub-menus.
or
, one of the available menus appears.
to select an option for adjustment/setup.
FEATURES
Ex.: "PICTURE" selected in the main
menu screen
FACTORY DEFAULT
to store.
.
to store. (See P. 24–25.)
PICTURE Menu screen (RGB Input Mode)