Lenovo ThinkServer TS200v Manual page 11

Systems management setup and use

Hide thumbs Also See for ThinkServer TS200v:

Configuring a client device to be a management console for

your ThinkServer TS200v

Step-by-step configuration (2)

APPLIES TO AMT 6.0 COMPLIANT TS200v MODELS ONLY

In Step 2, type in the IP address of the machine and Intel AMT

Admin Password.

Enter a new RFB password. Be sure to use a strong password (must

be EXACTLY eight characters long)

Click Enable to configure the managed client's Intel AMT firmware

for KVM Remote Control using the settings you have entered

Once all these steps are executed, you will be able to access remote machine

using VNC

ThinkServer TS200v: Systems Management Setup and Use

V3.0