Page 1
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx With the power to the machine OFF. 1. Remove the black thumbscrews. 2. Hold up the cap frame sash and remove it from the positioning pins by moving slightly forward. Positioning Pin 3.
Page 2
There are 3 tubular mounting positions depending on what hoop size you are using. On each side of the tubular arms are numbers 1-3. If for example you are using small tubular hoops you would use position number 1 on both tubular arms. This is the numbered slot on the tubular arm that will go under the pair of thumbscrews for each head on the pantograph.