Table of Contents
Advertisement
6.
Use the up/down arrow keys to select the stripe size for the RAID array (for
RAID 0, and then press <Enter>. The available stripe size values range from
4 KB to 128 KB.
We recommend a lower stripe size for server systems, and a higher stripe size
for multimedia computer systems used mainly for audio and video editing.
7.
When the Capacity item is selected, enter the RAID volume capacity that you
want and press <Enter>. The default value indicates the maximum allowed
capacity.
When the Create Volume item is selected, press <Enter>. The following
8.
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9.
Press <Y> to create the RAID volume and return to the main menu, or <N> to
go back to the CREATE VOLUME menu.
6.2.2
Creating a Recovery set
To create a recovery set:
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008
Copyright(C) 2003-10 Intel Corporation.
Enter a unique volume name that has no special characters and is
[↑↓]Change
6-6
[
CREATE VOLUME MENU
Name:
Volume0
RAID Level:
RAID0(Stripe)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
GB
Sync:
N/A
Create Volume
[
HELP
]
16 characters or less.
[TAB]-Next
[ESC]-Previous Menu
All Rights Reserved.
]
[ENTER]-Select
Chapter 6: RAID configuration
Advertisement
Table of Contents
