Table of Contents
Advertisement
6.3.2
RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an
RAID 0 volume with an RAID 1 or RAID 1E/10 volume.
To create a RAID 0 volume:
Follow steps 1–4 of the section RAID 1 volume.
1.
The Select New Volume Type screen appears.
2.
Use the arrow keys to select Create RAID 0 Volume, then press <Enter>.
LSI Corp Config Utility
Select New Volume Type -- SAS2008
Create RAID 1 Volume
Create RAID 1E/10 Volume
Create RAID 0 Volume
Esc = Exit Menu
Enter = Choose volume type to create
The Create New Volume screen shows the disks you can add to make up
3.
the RAID 0 volume. Use the arrow key to select a disk, then move the cursor
to the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Corp Config Utility
Create New Volume -- SAS2008
Volume Type:
Volume Size(GB):
Slot Device Identifier
Num
0
ATA
1
ATA
2
ATA
3
ATA
Esc = Exit Menu
SPACE/+/- = Select disk for volume
6-18
v7.07.00.00 (2010.04.30)
Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on
volume disks will be DELETED!
Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks including up
to 2 optional hot spares. ALL DATA on
volume disks will be DELETED!
Create a RAID 0 volume consisting of
2 to 10 disks. ALL DATA on
volume disks will be DELETED!
F1/Shift+1 = Help
v7.07.00.00 (2010.04.30)
RAID 0
296
RAID
Disk
ST3160812AS
E
[Yes]
ST3160812AS
E
[Yes]
ST3160812AS
E
[No]
ST3160812AS
E
[No]
F1/Shift+1 = Help
Drive
Pred
Size
Status
Fail
(GB)
---------- No
---------- No
---------- No
---------- No
C = Create volume
Chapter 6: RAID configuration
149
149
149
149
Advertisement
Table of Contents
