Table of Contents
Advertisement
4.
While checking the disk consistency, press <Esc> to display the following
options.
•
Stop
•
Continue - Continues the consistency check.
•
Abort
5.
When checking is complete, press any key to continue.
Using the Objects command
To check data consistency using the Objects command
From the Management Menu, select Objects, and then select Virtual Drive
1.
from the sub-menu.
2.
Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
Select Check Consistency from the pop-up menu, and then press <Enter>.
3.
When prompted, use the arrow keys to select Yes from the dialog box to
4.
check the drive.
5.
When checking is complete, press any key to continue.
ASUS ESC4000 Series
- Stops the consistency check. The utility stores the
percentage of disk checked, and when you restart checking,
it continues from the last percentage completed rather than
from zero percent.
- Aborts the consistency check. When you restart checking, it
continues from zero percent.
6-19
Advertisement
Table of Contents
