Advertisement
Available languages
Available languages
Installation procedure
4. Adjust the height of the shelf if required.
350 mm
(13
25
/
in.)
32
or
500 mm
11
(19
/
in.)
16
5. Organising the wiring
Cable
straps
Cable
6
The height of the shelf can be adjusted
to a height of either 35 cm (13
from the floor or 50 cm (19
the floor.
Use the following procedure to adjust
the height of the shelf if required.
Remove the screws which secure
the shelf to the supports.
Move the shelf to the required
height, and then secure it by
tightening the screws.
Insert the accessory cable straps into
the appropriate cable strap mounting
holes in the rear of the support.
Bring together the input cables which
are connected to the terminals at the
bottom of the Wide Plasma Display
and secure them with the cable straps.
N o t e
Note
• To loosen the cable strap:
While pushing in
the direction of the
1
arrow
Loosen the cable
strap.
25
/
in.)
32
/
in.) from
11
16
2
Advertisement
