Advertisement
Available languages
Available languages
2. Prepare the Wide Plasma Display.
• Spread a clean cloth or similar material over a level floor or base, and place the display unit on it face down.
Cloth or similar
3. Install the display to the stand.
Remove the screws and covers and keep
them for possible future use.
Display unit
*The screws may be used again if the
installation method is changed to the
waIl-stand method, so keep them in a
safe place so that they do not get lost.
Installation procedure
Insert the two projections on the
stand into the two holes in the base
of the display as shown in the
illustration at left.
Insert and tighten the four
screws, with two screws each at the
left and right.
N o t e
Note
• Lock the casters before installing the display.
M5-30
Unlock
Lock
5 5
Advertisement
