1.7 KVM Remote Control
KVM Remote Control is available on Intel vPro Q67 Express Chipset-based desktop boards that contain 2011
Intel Core i5 and Core i7 vPro and Intel Xeon processors with integrated Intel HD Graphics.
Note: KVM Remote Control is not supported on platforms with discrete graphics.
Note: For the purposes of this guide, the Intel AMT client system is provisioned in Local (SMB) mode.
If using VNC* Viewer+* as the remote management console, the user enters the IP address of the client, as
shown in Figure 26. For Authentication, use the Intel AMT administrator password. On the client system, a
six-digit access code will appear (Figure 27). This is used in the VNC Viewer+ console to gain access (Figure
28). Figure 29 shows the view of the Intel AMT client as seen from the VNC Viewer+ console.
Figure 27. Intel AMT Client Screen Showing KVM Remote Control Access Code
Intel® Desktop Board DQ67SW, DQ67EP, DQ67OW
Intel® vPro™ Technology Setup and Configuration Guide
Figure 26. VNC Viewer+ Console Remote Login
27