Hardware Installation - D-Link DHP-P500AV User Manual

Section 2 - Installation
Power
Plug in the DHP-P500AV into an AC wall outlet or power strip.
Note: Power source is confirmed when the Power LED on the DHP-P500AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable
connector located on the DHP-P500AV and attach the other
end of the Ethernet cable to the network or PC. Network
Connectivity is confirmed when the Ethernet LED on the
DHP-P500AV are illuminated.
WARNING! Only power cords are allowed to be inserted into the
EUT socket-outlet, no other direct plug-in equipment.
D-Link DHP-P500AV/DHP-P501AV User Manual

Hardware Installation

11