GE JK3500SFSS Dimensions And Installation Information

JK3500SF
GE 27" Built-In Double Wall Oven
®
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to wall ovens
44" to
must have an adhesion spec of at least a 194°F
bottom of
temperature rating.
junction box
Note: If marks, blemishes or the cutout opening is
F
visible above the installed oven, it may be necessary
to add wood shims under the runners and front
Conduit
trim until the marks or openings are covered.
40"
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
E
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
22"
They must be hard wired in accordance
with installation instructions.
D
Installation Information: Before installing, consult
instructions packed with product for current
dimensional data.
C L
2 x 4 or
KW Rating
equivalent runners
level with bottom of cutout
240V
7.2
and flush with sides of cutout
or solid bottom floor.
208V
5.4
Breaker Size
240V 30 Amps
208V 30 Amps
Cutout width
Cutout depth
25" MIN.
23-1/2" MIN
25-1/4" MAX.
Junction box
location
8-3/4"
MAX.
B
Cutout depth
23-1/2" MIN
Junction box
location
B
44" to
bottom of
junction box
Cabinet
Cabinet
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout C – Overlap of oven at bottom of cutout
Oven
Oven
D – Overall depth with handle
D – Overall depth with handle
E – Overall height with trim
F – Overall width
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
A
Cutout width
25" MIN.
25-1/4" MAX.
Cutout height
49-11/16" MIN.
50-1/8" MAX.
A
Cutout height
C
49-11/16" MIN.
Recommended
50-1/8" MAX.
minimum
cutout location
from the floor
C
Recommended
13-1/4"
27''
minimum
cutout location
from the floor
13-1/4"
27''
PK7500
JK5500
JK3500
27"
1"
1"
1"
26-23/32"
26-23/32"
52-1/8"
26-23/32"
26-23/32"
or GE appliance
®
service, 800.626.2000.
®
F
22"
23" minimum
door opening
allowance
23" minimum
door opening
allowance
C L
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
JK3500
bracing
(must support 375 lbs.)
to support
27"
runners
1"
1"
1"
Suitable
bracing
52-1/8"
(must support 375 lbs.)
to support
runners
Specification Created 2/13
8-3/4"
MAX.
F
Cutout depth
23-1/2" MIN
Junction box
location
Conduit
40"
Conduit
40"
44" to
bottom of
junction box
E
E
22"
D
D
C L
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Listed by
Underwriters
Laboratories
B
Ca
A
B
C
Ove
D
E
F
320380