GE JK1000DFBB Dimensions And Installation Information

8-3/4"
JK1000DF
GE 27" Built-In Single Wall Oven
®
F
Dimensions and Installation Information (in inches)
Note: These ovens are not approved for
Conduit
stackable or side-by-side installations.
Conduit
40"
40"
Note: These ovens can be installed side-by-side
with no less than 30" distance between center-to-
center of each oven.
D
Note: Cabinets installed adjacent to wall ovens
D
must have an adhesion spec of at least a 194°F
temperature rating.
"
22
Note: For 27" built-in single ovens, if marks,
"
22
blemishes or the cutout opening is visible above
the installed oven, it may be necessary to add
wood shims under the runners and front trim until
the marks or openings are covered.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
2 x 4 or
installation with a plug and receptacle. They
equivalent runners
must be hard wired in accordance with
level with bottom of cutout
and flush with sides of cutout
C L installation instructions.
2 x 4 or
or solid bottom floor.
equivalent runners
Installation Information: Before installing, consult
level with bottom of cutout
installation instructions packed with product for
and flush with sides of cutout
current dimensional data.
or solid bottom floor.
KW Rating
240V
3.6
208V 2.7
Breaker Size
240V 20 Amps
208V 20 Amps
8-3/4"
MAX.
MAX.
Cutout depth
Cutout depth
23-1/2" MIN
23-1/2" MIN
Junction box Junction box
location
location
22" to
22" to
bottom of
bottom of
junction box
Cutout width
junction box
25" MIN.
25-1/4" MAX.
A
B
C
B
27''
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout Cabinet
Oven
A – Overlap of oven at top of cutout
D – Overall depth with handle
B – Overlap of oven over side of edges of cutout
E – Overall height with trim
C – Overlap of oven at bottom of cutout
F – Overall width
Oven
D – Overall depth with handle
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
Cutout width
25" MIN.
25-1/4" MAX.
E
Cutout height
27-5/8" MIN. A
Cutout height
28-1/8" MAX.
27-5/8" MIN.
28-1/8" MAX.
C
Recommended
cutout location
23" minimum
from floor
door opening
Recommended
32-1/2"
allowance
cutout location
from floor
32-1/2"
PK7000
JK5000
27''
JK3000
PK7000
JK1000
JK5000
27"
JK3000
1"
JK1000
JK1000
1"
1" 27"
1"
26-23/32" Suitable
1"
bracing
30-3/16"
(must support 200 lbs.)
to support 1"
26-23/32" runners
26-23/32"
30-3/16"
26-23/32"
or GE appliance
®
service, 800.626.2000.
®
F
F
E
Conduit
40"
D
"
22
23" minimum
door opening
allowance
C L
2 x 4 or
equivalent runners
level with bottom of cutout
C L
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
(must support 200 lbs.)
to support
runners
* * ADA qualified based on Uniform
Federal Accessibility Standards
Specification Revised 4/13
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Junction box
location
Conduit 22" to
bottom of
40"
junction box
Cutout w
25-1/4" M
D
B
"
22
Cabinet
2 x 4 or
A – Overlap of oven at top of cutout
equivalent runners
B – Overlap of oven over side of edge
level with bottom of cutout
C – Overlap of oven at bottom of cuto
and flush with sides of cutout
Oven
or solid bottom floor.
D – Overall depth with handle
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
320441
8-3
25" MI
27''