GE JK1000 Dimensions And Installation Information

8-3/4"
JK1000DF
F
GE 27" Built-In Single Wall Oven
®
Dimensions and Installation Information (in inches)
Note: These ovens are not approved for
Conduit
stackable or side-by-side installations.
Conduit 40"
Note: These ovens can be installed side-by-side
40"
with no less than 30" distance between center-to-
center of each oven.
D
Note: Cabinets installed adjacent to wall ovens
D
must have an adhesion spec of at least a 194°F
temperature rating.
Note: For 27" built-in single ovens, if marks, "
22
"
22
blemishes or the cutout opening is visible above
the installed oven, it may be necessary to add
wood shims under the runners and front trim until
the marks or openings are covered.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
2 x 4 or
equivalent runners
installation instructions. 2 x 4 or
level with bottom of cutout
equivalent runners
and flush with sides of cutout Installation Information: Before installing,
level with bottom of cutout
or solid bottom floor.
and flush with sides of cutout
consult installation instructions packed
or solid bottom floor.
with product for current dimensional data.
KW Rating
240V
3.6
208V 2.7
Breaker Size
240V 20 Amps
208V 20 Amps
MAX.
Cutout depth
23-1/2" MIN
Cutout depth
23-1/2" MIN Junction box
location
Junction box
location
22" to
bottom of
22" to
junction box
bottom of
Cutout width
junction box
Cutout width
25" MIN.
25-1/4" MAX.
25-1/4" MAX.
A
B
B
C
27''
Cabinet
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
A – Overlap of oven at top of cutout
C – Overlap of oven at bottom of cutout
B – Overlap of oven over side of edges of cutout
Oven
C – Overlap of oven at bottom of cutout
D – Overall depth with handle
Oven
Overall depth with handle without handle
D – Overall depth with handle
E – Overall height with trim
Overall depth with handle without handle
F – Overall width
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
25" MIN.
E
A
Cutout height
Cutout height
27-5/8" MIN.
27-5/8" MIN.
28-1/8" MAX.
28-1/8" MAX. C
23" minimum
door opening
allowance
Recommended Recommended
23" minimum
cutout location
cutout location
door opening
from floor
from floor
allowance
32-1/2"
32-1/2"
27''
PK7000
PK7000
JK5000
JK5000
JK3000
JK3000
JK1000
JK1000
JK1000
27"
27"
1"
1"
1"
1"
1"
1"
Suitable
26-23/32"
bracing
(must support 200 lbs.)
to support
23-5/8"
to support
26-23/32" runners
30-3/16"
23-5/8"
26-23/32"
30-3/16"
26-23/32"
or GE appliance
®
service, 800.626.2000.
®
F
E
F
Conduit
40"
22
D
"
22
C L
C L
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
(must support 200 lbs.)
runners
* * ADA qualified based on Uniform
Federal Accessibility Standards
Specification Revised 4/13
8-3/4"
MAX.
Cutout depth
Conduit
23-1/2" MIN
40"
Junction box
location
22" to
D
bottom of
junction box
"
B
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
Cabinet
or solid bottom floor.
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges
C – Overlap of oven at bottom of cuto
Oven
D – Overall depth with handle
Overall depth with handle without
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
320441
Cutout w
25" MIN
25-1/4" M
27''